The swarm stack still hard-failed on an unset API_ORIGIN, and both the env
template and the README told the reader to pin it — the exact habit the derived
origin was meant to end. Make it an optional override everywhere, and say that
WEB_ORIGIN is now a list.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Renewal avisos left behind only a `RenewalNotice` row, whose sole job is
gating: a row with `sentAt` drops the policy off the pending list. It
cannot represent a failed send or a customer with no address, so the
Pólizas tab had no "Registro de envíos" to show and a sent notice simply
vanished from the list.
Renewals now write `email_notification_log` — the same table the four
bulk jobs write — as `RENEWAL_NOTICE` / `POLICIES`, with rows for
failures and no-email skips too. `RenewalNotice` keeps its gating role
unchanged; the two are complementary, not redundant.
- extend `EmailNotificationType` (+RENEWAL_NOTICE) and
`EmailNotificationServicio` (+POLICIES); `level` now carries the aviso
generation on renewal rows, so every reader must branch on the type
first (`notificationLevelLabel()` is the one place that lives)
- backfill emailed notices (`channel = 'EMAIL'`) into the log; MAIL-channel
rows are legacy printed letters and are deliberately left out
- extract `NotificationLogService`/`NotificationLogModule` as the single
writer, so a feature that sends mail records it without pulling the
bulk-job pipelines into its module
- `GET /notifications/log` and `/stats` take a comma-separated `servicio`
list; each tab reads its own slice. This also fixes the "Omitidos"
view, which mapped to no filter at all and showed every row
- share one `NotificationLogPanel` between both tabs
- pass SES_* / NOTIFICATION_ADMIN_EMAILS through the galactus compose,
which was missing them entirely — mail is runtime config, not a CI
secret, and the prod image sets NODE_ENV=production so a blank config
fails loudly instead of falling back to stdout
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
INSURANCE_FEATURES_SPEC §1. The office printed and mailed renewal letters
from the legacy CONTROL <ramo> RENEW[2/3] paper log; 91% of policyholders
have an email on file, so send the notice instead and keep the paper log
as the fallback.
A daily cron (06:00 America/Tijuana) sweeps three generations off
policyTo — 30 and 15 days before expiry, 7 days after — sends each
through SES, and upserts RenewalNotice by [policyId, generation] so a
policy is never notified twice for the same milestone. RenewalNotice now
records providerMessageId, so a later bounce or complaint webhook can be
traced back to the row that sent it.
- customers.emailOptOut excludes a customer from every sweep; editable
from the customer form
- scheduled_job_states holds the sweep's lock and last successful run;
the window is widened to cover days the job did not run, so a weekend
outage does not silently drop a generation
- SES unconfigured is not an error outside production — messages are
logged and skipped, so dev and CI never send
- /renovaciones (renewal:send, MANAGER+) lists what is pending per
generation, runs the sweep by hand, and marks a notice sent by mail
for the customers with no email
- POST /policies/:id/renewal-notices records that manual mark
- the aviso-renovacion report and the emails now share one projection
(reports/renewal-letter.ts) instead of two copies of the mapping
The Operaciones panel (backup, restore, sync, re-import) shelled out to
mysqldump as the application user, parsed straight out of DATABASE_URL.
`--single-transaction` issues FLUSH TABLES, which needs the global RELOAD
privilege, and the app user is granted only ALL ON jorgecuadros.* plus
USAGE ON *.*. BACKUP failed outright; SYNC and REIMPORT failed with it,
since both take a safety backup first.
An admin credential is now supplied out of band via OPS_DB_ADMIN_USER /
OPS_DB_ADMIN_PASSWORD, mirroring what deploy/scripts/pre-migrate-backup.mjs
already does, rather than permanently elevating the user the API serves
requests as. Host, port and database still come from DATABASE_URL, so the
override can only change who logs in, never which server. Unset, it falls
back to the DATABASE_URL credentials and warns — local development is
unaffected.
Two defects in the dumps themselves, both shared with the deploy backup
before it was rewritten:
- No --set-gtid-purged=OFF. The production server is the replication source
with GTID on, so every dump embedded SET @@GLOBAL.GTID_PURGED and was
unrestorable onto the server it came from — the one thing the restore
screen is for.
- The pipeline's exit status was gzip's, and gzip succeeded. A mysqldump
that died on its first statement left a small, perfectly valid archive
that the job recorded as SUCCESS and the restore screen listed as an
ordinary restore point. Dumps now run under `set -o pipefail`, assert a
CREATE TABLE count, and delete their own output on failure. Verified with
a stubbed mysqldump: a failing dump exits 1, surfaces the real error,
removes the partial file, and — critically — stops SYNC/REIMPORT before
the ETL touches anything.
Restores gained pipefail too: a corrupt archive made gunzip fail while
mysql, fed a truncated stream, could still exit 0.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Closes the gap between "what tag did I deploy" and "what is actually running",
and gives the schema a history that can be reasoned about across releases.
Migrations
- Baseline the existing schema as 0000_init (migrate diff --from-empty). The
schema had only ever been applied with `prisma db push`, so no history
existed and schema state was disconnected from app version. Existing
databases must be baselined once with `migrate resolve --applied 0000_init`;
the workflows print this remedy on P3005.
- Run `prisma migrate deploy` as a deploy STEP, not the container CMD — as a
CMD, N replicas would race each other applying the same migration.
Version reporting
- GET /version on the API reports the APP_VERSION / GIT_SHA / BUILD_DATE that
build.yml already baked into both images but nothing ever read.
- The web footer shows the web build and flags an api/web mismatch. The two
cannot drift at build time (one matrix run) but can at deploy time.
- Both deploy workflows now fail if the running API does not report the tag
that was dispatched — a stack naming a tag is not proof of what is running.
- scripts/set-version.mjs stamps every package.json, which had all sat at
0.1.0 while real releases shipped as v1.x.
Pre-migrate backup
- deploy/scripts/pre-migrate-backup.mjs dumps the database from INSIDE the
still-running old API container over Portainer's Docker API, so the file
lands in the volume the Operaciones restore screen reads. A dump taken on
the CI runner would be unreachable by the only restore path we have.
Verifies the artefact with `gzip -t` before letting the migration proceed.
galactus
- deploy/galactus/*.compose.yml: standalone-Docker ports of the Swarm stacks.
Plain compose silently ignores `deploy:`, so restart_policy becomes
`restart: unless-stopped` — without it nothing returns after a host reboot.
- .gitea/workflows/deploy-galactus.yml drives endpoint 3 with its own secrets.
Fixes
- deploy.yml passed `endpoint_id` and `pull_image` to
cssnr/portainer-stack-deploy-action, which has no such inputs (they are
`endpoint` and `pull`). The endpoint was silently never set.
docs/DEPLOY_AND_MIGRATIONS.md documents expand/contract as the rule for schema
changes: Prisma has no down-migrations, so a code rollback never rolls the
schema back, and restoring the replication master from a dump diverges every
replica.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Add the missing api/web deployment path on top of the existing image build CI.
- deploy/jorgecuadros-app.stack.yml: PROD app stack (api + web) pulling the
git.mancinas.io registry images. Does not ship mysql/minio (separate stacks);
API reaches them via DATABASE_URL / S3_ENDPOINT. API pinned to the
jorgecuadros_db node for stable ingest/backup volumes; web is stateless.
- deploy/jorgecuadros-app.env.example: documented stack env template.
- .gitea/workflows/deploy.yml: manual (workflow_dispatch) deploy to Portainer
via cssnr/portainer-stack-deploy-action. Inputs: image tag + scope
(app = web+api, full = db+minio+app, applied db->minio->app).
Make the web API origin runtime-configurable instead of build-baked: the root
layout injects window.__API_ORIGIN__ from the API_ORIGIN env (force-dynamic) and
lib/api.ts resolves it at runtime, so one built image serves any deployment.
Also: dev.sh to run both dev servers (frees stale ports first) and move local
dev to ports web 4500 / api 4501.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
rmancinasandClaude Opus 5